DIY Car Service: Is It Sufficient To Do It On Your Own?

There was a time when people took great pride in being self-sufficient. They could fix things around the house, they could grow their food, and they could take care of their vehicles.

These days, many people have lost that sense of self-reliance. But there is still something to be said for doing things yourself. This blog post will unfold the basics of DIY car service and help you understand how you can do a few of them!

Car Servicing – What’s Included?

You need to keep in mind a few things d when performing a DIY car service. The first is that you will need to have the right tools and equipment. It includes:

• a jack,
• lug wrench,
• socket set,
• torque wrench,
• and other essential tools (screwdrivers, spanners)

You need to familiarize yourself with the components of your vehicle and how they work.

The next thing you need to know is what services are included in a car service. In general, a car service consists of an oil change, tune-up, tire rotation, brake inspection, and fluid check.

However, each vehicle is different, so you may need to do some additional research on your specific model.

How Can I Perform A DIY Car Service?

Now that we’ve covered the basics, let’s look at how you can perform a DIY car service.

Engine Oil Check-Up: The first step is to check the engine oil. You can start by locating the dipstick (usually a bright yellow color), pulling it out, and checking the level against the dabs on the stick. If the oil is too low, you need to add more.

Tire Rotation: The next step is to rotate your tires. Depending on your vehicle, it is advised to do so between 5000-8000 miles. To do this, you’ll need to remove the lug nuts from each tire and then swap them around so that each wheel has a different nut on it.

Be sure to use a torque wrench when tightening the lug nuts back up!

Brake Inspection: The brakes make your car’s most crucial safety features, so it’s essential to make sure they’re in good condition. You’ll need to jack up the car and remove the wheel to do a brake inspection.

After removing the tire, inspect the brake pads and rotor for wear. If there’s any damage or excessive wear, your automobile will need to be serviced.

These are just a few of the DIY services you can do on your car. You’ll save money and learn more about how your vehicle works by doing these services yourself. Not to mention, it’s a lot of fun!

If You’re Uncertain, We’re Here:

However, if you are uncertain about the process and don’t want to risk damaging your car, it’s always best to take it in for service. That’s what we’re here for!

Bring your vehicle into our shop and let us take care of it.

We’ll make sure it’s fixed right, and you’ll be back on the road in no time. You can visit our website at Eastern shore Hyundai, serving Summerdale, AL, and confirm the service timings or schedule a service online.